BLUETTI · Power station · Elite 10
Palm-sized 128Wh power station with 200W AC output.
Infographic gallery
200W rated output
The comparison uses BLUETTI’s published rated and peak, surge, or maximum output figures.
Listed capacity
128Wh
Published runtime guidance
Estimated runtime = Total capacity × DoD (95%) × Inverter efficiency (90%) ÷ (Device power + Elite 10 self-consumption*) *Self-consumption power: DC on: 2 W AC on: 5 W AC + DC on: 7 W Note: Actual runtime may vary based on device usage.
See official product specifications
Listed weight
See official product specifications
Dimensions
Charging or integration
70-minute AC charging; 100W max solar input
Backup transfer
≤10 ms UPS switchover
Noise
Quiet battery operation; fan noise varies by load
Official product gallery
The current official image set for Elite 10 includes product views, connection diagrams, feature explanations, and compatible system configurations where BLUETTI publishes them.
Complete specifications
These pages retain BLUETTI's model-specific output, charging, battery, port, continuity, dimensions, environmental, engine, fuel, app-control, and warranty fields where published.
System capability
Palm-sized 128Wh power station with 200W AC output.
Power and expansion
No, the Elite 10 is not waterproof. Please store it in a cool, dry place. Operating humidity: 10% to 90%.
Charging flexibility
Yes. With a 128Wh capacity, the Elite 10 falls within the IATA-approved range (101Wh–160Wh) for carry-on batteries. However, always check with your airline before flying to confirm their specific rules and approval requirements. For detailed requirements, click this link [https://www.faa.gov/hazmat/packsafe/lithium-batteries] to confirm.
Battery and durability
Yes, you can control and monitor the Elite 10 through the BLUETTI app using Bluetooth.
Controls and continuity
In the BLUETTI app, go to “Charging Mode” and select “Custom.” From there, you can adjust the charging current to your preference.
Portability detail
Yes, as long as they meet these requirements: －Open Circuit Voltage (Voc): 12–28 V －Output Current: 8.2 A Max. －Power: 100 W Max. －Connector Type: MC4-to-XT60, Anderson-to-XT60, or any solar charging cable compatible with an XT60 input. Note: You can purchase the MC4-to-XT60 cable directly from our site.
Compatibility note
Estimated runtime = Total capacity × DoD (95%) × Inverter efficiency (90%) ÷ (Device power + Elite 10 self-consumption*) *Self-consumption power: DC on: 2 W AC on: 5 W AC + DC on: 7 W Note: Actual runtime may vary based on device usage.
Additional manufacturer note
Yes, it supports pass-through charging, with a maximum input of 350 W.
Best-fit uses
Standout features
Use the independent calculator before choosing a battery system or generator.
Ownership resources
Start with the exact BLUETTI Elite 10 model or item number. Accessory families can look alike while using different connectors, electrical limits, engines, or mounting points.
Compatible accessories
Shop BLUETTI solar panels, charging leads, and adapters intended for its portable-power ecosystem.
Find vehicle, wall, USB, and model-specific charging accessories from BLUETTI.
Protective and mobility accessories can make storage and transport easier.
Compatibility note: Links lead to manufacturer or official retailer resources. Confirm the full model or item number, connector type, voltage, amperage, and published compatibility list before buying. Installation involving a home panel, inlet, transfer switch, or fuel plumbing should be handled as required by local code.